Radon By Zip Code – Ohio radon levels by zip code and Ohio radon map ideas help you measure average radon levels in your county. It also helps you make informed decisions about when and how to conduct radon testing and radon mitigation. Once you know your county’s average radon action level and have it tested for radon, you can choose to install one of the radon mitigation systems available. But first, what exactly is radon?
Radon is a deadly radioactive gas formed during the decay of uranium. Uranium decay occurs in soil, rocks, and sometimes in water. The gas produced is colourless, odorless and very lethal to humans.
Radon By Zip Code
Ohio state government and the Environmental Protection Agency recommend keeping radon levels below 4 picocuries (4 pCi/L) per liter of air.
Radon Testing And Radon Remediation In Delaware County
Radon levels in Ohio by your county zip code greater than 4 pCi/L are not considered acceptable. So, you want to install a radon mitigation system to protect your family from the deadly hands of radon.
Ohio has a high radon problem due to its geographic location and geological structure. Ohio’s location on the US map makes it one of the states with the highest radon levels. Again, Ohio soil has high amounts of uranium (a major source of radon).
Because of this unique makeup, Ohio radon levels by zip code show that the state’s radon levels are higher than the national average. You can find a pictorial representation of this on the Radon, Ohio map below.
Radon Mitigation Charlotte, North Carolina
The Ohio radon map below shows three levels of radon action. This map is also the Ohio EPA Radon Map.
The red area labeled as zone 1 shows very high radon levels above 8 pci/L. This includes areas such as Cincinnati and Hamilton County.
Zone 2 of the Ohio radon map is the region between 6 and 8 pCi/L. The final zone is counties with readings below 4 pCi/L.
Pro Lab Radon Gas Test Kit Ra100
Find your county in Zone 1 or Zone 2? Then contact an Ohio radon expert today.
“My county is in Zone 1”. It should not stop you from calling us. In addition, it is advisable to carry out tests and install mitigation systems before dangerous levels build up.
Above is a general radon map for Ohio, followed by average levels by zip code. It mainly covers Cincinnati and Hamilton counties, so the data is only for zip codes in that area. For full data on radon levels in Ohio by zip code, go here.
Residential Radon Testing
Radon is a very deadly gas that can cause cancer and, at worst, death. Knowing your radon level is the first step to protecting yourself and your family from radon.
However, radon testing is not sufficient for complete protection against radon: a radon mitigation system must be installed or remedial work carried out. Contact us today and we can help you get rid of radon to protect your family. Radon mitigation systems cost between $730 and $1,500, with most homeowners spending around $1,100. Depending on the design of your home and the size of your foundation, a complex radon reduction system can cost $2,500 or more. A professional radon level test costs an average of $150 per test.
Radon mitigation systems cost between $730 and $1,500, with most homeowners spending around $1,100. Depending on the design of your home and the size of your foundation, a complex radon mitigation system can cost $2,500 or more. Professional radon level testing costs an average of $150 per test.
Radon: Frequently Asked Questions
Radon remediation costs range from $500 to $2,500 for gas extraction systems and $1,000 to $4,700 for water treatment solutions. As a complete solution, most homeowners spend about $2,000 on radon removal.
With modern testing equipment and processes to eliminate leaching, radon gas levels in all homes are stable, and most homes are stable within a day.
Across the country, radon concentrations are concentrated in around 6% of homes. The discovery process begins with a test that costs between $20 and $200. Home radon test kits cost less than $20, while professional radon level tests cost an average of $150 per test.
Radon Testing & Radon Mitigation System
Based on current data, many states in the United States have not registered radon levels considered dangerous, but the Environmental Protection Agency (EPA) recommends testing all homes for the presence of radon.
Safe radon levels are below 2.0 pCi/L, with an average normal home level of 1.3 pCi/L.
“The DEP and the Environmental Protection Agency (EPA) both recommend that you take steps to mitigate your home environment if your test results show radon levels of 4.0 pCi/L or higher. — New Jersey DEP zip codes and radon levels by state
Whole House Radon Mitigation System For Radon Remediation
In the United States, the highest radon levels have been measured in the Appalachian Mountains of Iowa and Pennsylvania. However, homes in the United States can have very different amounts of radon, regardless of location.
On the Environmental Protection Agency website, you can find an interactive map detailing the levels found in each state, divided into three different zones for each county.
Radon mitigation systems cost between $500 and $4,700, with most homeowners spending between $700 and $1,500. Radon mitigation professionals can reduce the problem of indoor radon gas contamination in your home’s air and water systems in a number of ways.
Can Help: Detecting Radon
A ventilation pipe system that draws in and exhausts radon gas from under the house to outside the house.
Perforated pipes, called drain tiles, draw radon out of the soil around you and drain it out of your home.
Cover exposed soil under crawl spaces, basements, or manufactured homes with plastic sheeting to vent radon gas out of the home.
Why Pennsylvania Radon Levels Are High And How To Test Your Home
According to Dr. Tom Greiner, EPA, Iowa, Department of Public Health, the following radon mitigation methods are the most effective in reducing radon gas levels in your home [3].
Reducing radon gas in the home usually requires a four-pronged attack from various radon remediation systems. Let’s look at each step to remove radon from your home.
Be sure to install a loud audible or visible warning system to alert you if any of your operational systems malfunction.
Assessment And Mitigation Of Indoor Radon Problem: A Case Book For Radon Professionals
The first type of radon reduction system we cover is venting radon gas from the soil beneath your home. Restoration costs for this method range from $500 to $2,500, depending on the type of foundation.
Active subslab systems, also known as decompression systems or soil suction systems, cost between $500 and $2,500. This is the most common method of radon mitigation. According to the EPA, this “system is designed to achieve sub-slab air pressure that is lower than room air pressure using fan-driven vents that draw air from under the slab.”
Drill a hole in the soil through the slab and place the PVC pipe there. The exhaust fan is then installed and the fan and duct are sealed. The ventilation pipe then continues to the exit point. There it stays above the roofline before opening.
Why Is There So Much Radon In The Portland Metro Area?
Passive subslab suction or depressurization (PSSD) is when vents and pipes are installed but compartment fans are not running.
Drain tile suction systems cost $700 to $1,500 for exterior drain systems and $800 to $2,500 for sump pump systems.
When building a house, drainage pipes are often laid around the foundation, and these can fill with radon gas and enter the house. In many homes, these pipes must be installed if they are not present, or if an open or incomplete drainage loop has been completed and closed. A vacuum is applied to this drainage area and with the aid of a sump pump it is drawn and ventilated to a point above the roof line before the opening.
Radon Authority Venice Florida Radon Test Testing Radon Mitigation 941 706 8077 Zip Code 34275, 34285, 34292, 34293 Image
Sump pump system installation costs range from $800 to $2,500. This system is very similar to the ASD, but with an airtight cap fitted over the sump hole to improve suction.
Installing an under-membrane pressure reduction system can cost between $500 and $2,500. The exposed soil under crawl spaces, basements, or manufactured homes is covered with an airtight poly vapor barrier like impermeable membrane.
The plastic is caulked into the walls. Ventilation pipes are placed through the membrane into the soil to expel radon gas out of the house with the help of attic ventilation fans.
Radon In The Home
A small crack can cost less than $100 to properly seal against gas intrusion, while a large foundation repair can cost between $5,000 and $15,000. Gas sealing begins by injecting polyurethane foam into foundation cracks or sealing them with flexible caulk.
The expansion control joints and floor and wall joints are then sealed with a compound such as ElastiPoxy Crack & Joint Filler. All plumbing access points are then sealed and the sump pump is covered with an airtight cover and caulk.
Another type of mitigation system is to keep radon out of your walls and out of your home.
See Ny Counties With Highest Levels Of Cancer Causing Radon Gas
A small blower removes the radon gas from the drywall cavities and ducts and exhausts it outside the home.
Installing a block wall vacuum and suction system can cost between $1,500 and $2,500. This method of radon removal is for houses with block wall foundations. Radon can travel into your home through gaps in bricks and blocks.
A pneumatic barrier on slab system, or ASAPDB system, costs between $250 and $1,000.
Radon Testing And Radon Remediation In Lancaster County
Radon levels by zip code pa, radon gas levels by zip code, radon risk by zip code, radon gas by zip code, radon by zip code california, oregon radon map by zip code, radon map by zip code, radon results by zip code, radon levels by zip code ny, radon levels by zip code, radon level by zip code, radon test results by zip code
