Ways To Bind A Quilt – A good way to get started and get some experience with a machine-finished joint is the Flanged Joint, also known as a forged flange joint or piping. This Floral Table Runner is finished with a flange closure.
After practicing the flange binding method on many quilts, my confidence grew with experience. This experience allows me to get some useful tips to make this method more successful. Then I was eager to try a machine-stitched binding without the extra step of sewing two narrow pieces together to create a binding strip. But I still like to use the flange binding method when a project needs a little extra zing!
Ways To Bind A Quilt
This technique uses two narrow complementary strips of fabric to form a binding strip. This method adds a little color and frames your quilt in style. The flange binding method is performed by sewing from the front of the quilt, trenching over the binding, along the seam where the two strips meet. This will result in a seam line on the back of the quilt, next to the binding. This requires an extra step in making the binding, as you need to sew two narrow strips along the binding strips.
Quilt Binding: Part 3
So I need 4 wide strips of fabric cut diagonally to make enough binding for this runner.
Cut your MAIN binding fabric (floral) strips to 1.50″ wide. Cut your FLANGE strips (yellow) to 1.75″ wide. Sew the pieces of each piece together using a butt joint. Cut the corners. And open the seams.
I neglected to photograph the assembled Floral Table Runner binding strips. So these first four pictures show another example using black and gray fabrics.
Binding A Quilt: A Sew Easy Lesson
Cut your MAIN binding fabric strips (grey) to 1.50″ wide. Cut your FLANGE strips (black) to 1.75″ wide.
After joining, cut and press the pieces for each piece, right sides together, sew the pieces lengthwise with a 1/4″ seam.
I always roll my finished binder around a piece of card stock to keep it flat and neat.
Binding A Quilt Tutorial
Once your quilt is quilted and ready to use binding, cut the quilt batting and backing even with your quilt top.
For a small project like this runner, before I start sewing my bindings, I like to adjust around the perimeter of the quilt to make sure none of the binding ends up in the corner of the quilt. For larger projects, I use a piece of paper to mark the length of the edges and judge where I should start binding so as not to join the corners.
The quilt in this pattern is 40″ wide and 60″ long. The numbers between the black lines shown on the outside add up to 42″, which is the length of the binding between the seams. The numbers shown on the inside of the quilt add up to 42″ on each side of the quilt. the edge of the quilt.
The Fastest Way To Bind A Quilt: Machine Quilt Binding Tutorial
Leave a 10″ tail and pin to the BACK of the quilt with the FLANGE fabric facing up. Backstitch to the beginning of the seam, then continue.
Bind off across the quilt until you are about 12″ from where you started. Backstitch and stop sewing. Remove the quilt from your machine.
Lay your starting tail flat against the edge of your quilt. The tail ends at the 8″ mark on the ruler.
Machine Binding Tutorial — Swim Bike Quilt
Fold your end tail over the beginning tail and overlap the width of the tie. It will be 2.5″. However, I cut the tail a bit so that the tie is tight and doesn’t sag or bend.
Open your tails as shown. On your starting tail, mark a 2.5 inch diagonal line from the bottom corner to the top corner.
Overlap the ends of your tail to meet the miter. Be careful to use a pin to match where the seam lines on the two tails meet diagonally.
Fun Bindings That Add Way More Personality To Your Quilt
When making your final joining stitch, it can be a little tricky to align the seam. Notice that the pin helps align the two stitches in the tail.
Carefully sew the diagonal line so that the needle passes through the hole where the pin meets the two lines of stitches.
Open your seam to check before cutting your tails. If your stitches don’t line up correctly, remove the stitch and try again. I did two tests before I was satisfied with this combination. Cut the seam and open the seam as you did when joining the pieces to make the binding. Then put the quilt back in the machine to complete your binding. Backstitch at the beginning and end of your last stitch.
Other Binding Options
Now take your finished blanket to the ironing surface and give the binding a good press. Press the binding from the back of your quilt to the front.
Turn the quilt to the front and begin to sew a binding to the front of the quilt with the long thread tails. I use a slightly longer stitch length for this, just like I do for quilting, setting the stitch length to 3.0. Sew the channel between the flange and the main piece. If you have a plug for your car, now would be a good time to use it.
Then fold the edge you made over the corner to make a nice corner and pin or hold in place. Continue sewing all the way around the blanket, meeting the corners as you go. Once you reach the starting point, try to go down to the same stitch hole you started with. Lift the needle and remove your blanket from the machine, leaving a long tail of yarn.
Karen’s Quilts, Crows And Cardinals: Tutorial
Pull your top thread tail through the back of the blanket and tie them neatly into a knot.
Using a standard hand sewing needle, press the thread tails, pull the knot through the rod and cut the tails.
The Flange Binding method results in a seam line on the back of your quilt about .25″ from the binding. Machine binding can save you a lot of time and allow you to get a quilt that holds up better with repeated washings today. I can give you a beautiful binding every time and I’m going to teach you how to bind a quilt with a sewing machine using a unique trick that will create straight stitches!
Machine Quilt Binding Vs. Hand Stitching
First of all, this technique is not for everyone. If you prefer hand-stitched quilt binding, that’s fine. But if you need to machine stitch a quilt block, I think this post will help you a lot.
Often, quilters prefer to bind their quilts using a combination of machine and hand stitches. Binding strips are cut and sewn, then machine sewn to the quilt top. The binding is then folded to the back of the quilt, where it is sewn by hand.
I prefer to sew my quilts with a sewing machine for a variety of reasons. I’ll get into the explanation later in this post, but mainly because quilting by hand is too tiring for me due to my arthritis.
The Ultimate Quilt Binding Tutorial Round Up
I have machine bound many quilts over the years. Mostly because I’m always pressured by a deadline. I tried many different methods, but found myself coming back to this method again and again.
This includes sewing the binding to the back of the quilt, not the front, and using an edge stitch foot for the perfect finish!
For a number of reasons, you may want to machine bind a quilt rather than hand. First, if the blanket is for a baby or toddler and is washed often, I feel that the machine wash holds up better with frequent washing.
The Aqua House: How To Bind A Quilt (double Fold, Mitered)
Another reason is that hand quilting is difficult for people with arthritis. I have arthritis and find that hand quilting sometimes hurts my fingers for days. I can not. I find that locking a car is easier on my hands.
There are two ways to tie a blanket. One is to sew a folded quilt with a sewing machine. Then hand sew the binding using a blind stitch around the perimeter of your quilt. This method gives the “best” results because you can easily hide the hand stitches in the binding.
Machine binding a quilt involves machine sewing the binding to the quilt and using the machine to sew the binding in place. Some people don’t like this method because there are visible stitches in your quilt after you’re done. However, I will show you
How To Bind A Quilt With Mitered Corners
How to bind a quilt for beginners, ways to bind a booklet, how to bind a quilt by machine, different ways to bind a quilt, bind a quilt tutorial, how to bind a quilt, ways to bind paper, ways to bind pages, ways to bind a book, machine bind a quilt, ways to bind a calendar, ways to bind
